PUP110 Series

        110W Single
        to Quad Output

        Desktop AC/DC Power Adapters
 
 
 
      Data
        Sheet
 
 
 
 
 


        

          
EN 61000-3-2 Compliance
          
85-264 VAC Universal Input
          
Input Surge Current Protection
          
Overvoltage Protection
          
Overcurrent Protections
          
100% Burn-In
          
High Reliability
          
UL, CSA & TUV Approved
          
CE Marked
          
Optional PFD and Power Switch
        
 
 
Input Voltage.............90-264 VAC
Input Frequency...........47-440 Hz
Inrush Current............30A@115VAC, 60A@230VAC; @25°C cold start
Ripple & Noise............1% peak to peak max.
Overcurrent Protection....Short circuit protectin on all outputs
Overvoltage Protection....112% to 132% on main output
Operating Temperature.....0-70°C; 100% load up to 50°C
Derating..................Derated 2.5%/°C from 50°C to 70°C
Cooling...................Built-in DC fan
Hold-up Time..............12 msec min. at nominal input
Efficiency................65% min. at full load
Line Regulation...........±0.5% max. at full load
Safety Approvals..........UL1950, CSA C22.2 No. 234, IEC950/EN60905
EMI Standards.............FCC 20278 Level B, conducted
                          VDE 0877 Level B, conducted
MTBF......................>550,000 hours at full load @25°C
Input Connector...........IEC 320/C14 3-pin male inlet
Output Connector..........8-pin male DIN (Contact factory for other types.)
Power On/Off Switch.......Optional (Suffix S)
PFD Signal................Optional (Suffix PF)
Weight....................3 lb
Dimensions, L*W*H.........10*5*2.7 inches

Model No.	Output
	Vnom	Imin	Imax	*Ipk	Pmax	Tol.
Single Output Models
PUP110-10	5V	0A	22A	---	110W	±5%
PUP110-12	12V	0A	9A	---	108W	±4%
PUP110-13	15V	0A	7.5A	---	110W	±3%
PUP110-14	24V	0A	4.5A	---	108W	±3%
PUP110-16	30V	0A	3.6A	---	108W	±3%
PUP110-18	48V	0A	2.3A	---	110W	±3%
Dual Output Models
PUP110-23	+5V  +12V	0A  0A	10A  5A	---  9A	110W	±5%  ±5%
Triple Output Models
PUP110-31	+5V  +12V  -12V	0A  0A  0A	10A  5A  1A	---  9A  ---	110W	±5%  ±5%  ±5%
PUP110-32	+5V  +15V  -15V	0A  0A  0A	10A  4A  1A	---  7.5A  ---	110W	±5%  ±5%  ±5%
Quad Output Models
PUP110-40	+5V  +12V  -12V  -5V	0A  0A  0A  0A	10A  5A  1A  1A	---  9A  ---  ---	110W	±5%  ±5%  ±5%  ±5%
PUP110-41	+5V  +15V  -15V  +24V	0A  0A  0A  0A	10A  4A  1A  1A	---  7.5A  ---  ---	110W	±5%  ±5%  ±5%  ±5%
PUP110-42	+5V  +12V  -12V  +12V	0A  0A  0A  0A	10A  5A  1A  1A	---  9A  ---  ---	110W	±5%  ±5%  ±5%  ±5%
PUP110-45	+5V  +12V  -12V  +24V	0A  0A  0A  0A	10A  5A  1A  1A	---  9A  ---  ---	110W	±5%  ±5%  ±5%  ±5%
PUP110-45-1	+5V  +12V  -12V  +24V	2A  0A  0A  1.5A	10A  5A  1A  3A	--- 9A  ---  ---	110W	±5%  ±5%  ±5%  ±10%
PUP110-45-2	+5V  +24V  -12V  +12V	0A  0A  0A  0A	10A  3A  1A  1A	---  5A  ---  ---	110W	±5%  ±5%  ±5%  ±5%
PUP110-46	+5V  +15V  -15V  -5V	0A  0A  0A  0A	10A  4A  1A  1A	---  7.5A  ---  ---	110W	±5%  ±5%  ±5%  ±5%
*Ipk is the peak output current with 10% max. duty cycle for less than 60 seconds.   Total peak power must not exceed 110 watts.